#Ssh tunnel 80 password

Remote port forwarding is the exact opposite. An SSH tunnel is established to a remote system, and traffic from the local network can use that tunnel to transmit data back and forth, accessing the remote system and network as if it was a part of the local network. Local port forwarding is used to make an external resource available on the local network. Each configuration requires its own steps to set up, so we will go over each of them later in the tutorial. There are a few different things you can do with this: local forwarding, remote forwarding, and dynamic port forwarding. if you want to connect to the Home Assistant UI and host from a local, secure network and cannot use a VPN, you could use the SSH command above to open a command line on the HA host while at the same time exposing the HA UI on port 8000 on your local machine.To put it simply, SSH port forwarding involves establishing an SSH tunnel between two or more systems and then configuring the systems to transmit a specified type of traffic through that connection.At least I use this with the AVM Fritz!Box (quite popular in Germany). There might be an appropriate option available on your router. Just address the HA host via IP on any port.

if you want to connect to the Home Assistant UI and host from a local, secure network and you have the possibility, I’d go for a VPN.

Strong, auto-generated passwords and a password-manager like Bitwarden are always a good choice.

if you want to connect to the Home Assistant UI from anywhere, TLS/SSL is the only way to go (ever started an SSH tunnel on your mobile phone?).Let’s Encrypt will not issue a certificate for an IP, so you need a public resolvable DNS name for your HA host to use it. To expose your instance to the internet, use a VPN, or an SSH tunnel.Īctually, the instructions on the referenced page are somehow … promoting the use of Home Assistant Cloud. Other options are to use TLS/SSL via the add-ons Duck DNS integrating Let’s Encrypt or Let’s Encrypt. If Home Assistant is running on itself, then the alternative command would be ssh -L 8000:127.0.0.0:8123 you connect to and forward port 8123 on same target machine to local post 8000. If IP 192.168.0.5 is the IP of the Home Assistant host, then it will work. $ ssh -L 8000:192.168.0.5:8123 will establish port forwarding from your local machine (where you run the SSH command), port 8000 to IP 192.168.0.5, port 8123 via an ssh connection to. Isn’t this correct?īut, what I really appreciate, is your suggestion to use a TLS/SSL connection, even if I still wonder why? Assuming my understanding of the tunnel is as written above, a key pair was much stronger than credentials (+2FA).

In the network system I want to access I want to use port 8000 (through the router, for which I’d need to forward port public 8000 to… local 22?) to access 192.168.0.5 at port 8123, which, to use my example from the OP, my HA UI. So it’s a bit like a VPN tunnel.Įspecially I don’t understand your last sentence. third-party websites which are blocked by the remote client or remote “local” network ressources such as HA UI). So, you would connect to a mapped port on your client, no the (Home Assistant) host.Ĭould so perhaps specify this? I thought the purpose of SSH tunnel is to access ressources (e. You can provide options, that tunnel remote ports traffic thru ssh to local ports. If these descriptions are correct, why should you use TLS instead of a SSH tunnel (presuming port 22 is available on the remote machine)?

#Ssh tunnel 80 password

Security improvement: Using combination of public/private key instead of password Weakest point: SSH password and brute-force attack After establishing this connection you could access your local HA instance, e. So first you need to open a SSH tunnel from your remote network (= internet) to. You need to set a port forwarding from e. Security improvement: Strong password + 2FA Weakest point: Your password and brute-force attack So if you call you should see your HA instance.Įntry to your HA: Login credentials (username + password) from public 80 to local 80 and public 443 to local 8123. With setting an TLS/SSL certificate by using the Let’s encrypt add-on you need to set a port forwarding in the router, e. So if I have a misunderstanding please correct me!īasically let’s say you simply know you’re changing public IPv4 address (e. I want to check the differences between both methods. Following this Securing - Home Assistant (home-assistant.io) you could either use TLS (via Let’s encrypt) or an SSH tunnel. I’m also on exposing my HA instance to the internet.